Search found 3 matches

by DustyFrank
Wed Sep 18, 2013 3:19 pm
Forum: Keeping Cool
Topic: changes to the FIGJAM's evaporative cooler design
Replies: 42
Views: 12919

Re: changes to the FIGJAM's evaporative cooler design

Delta 152 cfm 12v fan with pwm controller.JPG Shown are the Delta 152 cfm fan from Jameco, along with the pwm controller I discussed above. Looking at the fan on the black label side, the wires exiting from the motor, counter clockwise, are positive, negative and unused. Don't bother trying to deci...
by DustyFrank
Wed Sep 18, 2013 1:43 pm
Forum: Keeping Cool
Topic: changes to the FIGJAM's evaporative cooler design
Replies: 42
Views: 12919

Re: Jameco Fan

So I took the fans apart and figured out from the diagrams, spec sheets etc. which wires were actually + and -. Result: the fans work as they should, and have plenty of power. For those who might want to control the fan speed, Amazon sells a 10 amp pwm controller, which I also tested, and it works f...
by DustyFrank
Mon Sep 16, 2013 4:56 pm
Forum: Keeping Cool
Topic: changes to the FIGJAM's evaporative cooler design
Replies: 42
Views: 12919

Re: Jameco Fan

I just got off the phone with Jameco tech support. The Jameco fan you suggest, which has 4 wires and is specified as DC on their page, will not run on plain old Direct Current. This is unfortunate because it has a nice high CFM output. It requires a pulse width modulated speed controller, which Jame...

Go to advanced search