yup!

GreyCoyote wrote:And just enough room to cool a six pack. Schweet!

I dont think fabric glue would hold up

Mine is a whisper quiet 1000, II was planning to chain it to avoid theft, I will look into a box for it as well You may want to consider building some sort of box or baffle for your generator anyways. They serve a number of functions on the playa - most importantly, they dampen the sound. Unless you...

interesting, I will bring the extra spark plugs and filter, I may still make a pre-filter and get it off the ground for sure

do I need to build a box or tent to protect my small genny from the playa dust?

has anyone done this with helpful suggestions?

I think you mis read what I wrote, I am using a reg machine, I am using a 90wt thread that I had for the embroidery machine because it is stronger than the thread I tried first. I also have a computerized embroidery machine but it is not getting used in this project I'd +1 the stronger needle and be...

this tip I think will be great! I was having trouble with it feeding, it isnt rubbery but it wasnt going along as it should If your fabric resists being fed through you can always put tissue paper under and over the project. Sew right through paper and all. It rips right off afterwards. This is espe...

what is the correct needle to use for furs??

I am using brother 90 weight thread wich is meant to be bobbin thread in my embroidery machine and is very good and strong the backs of the furs are all soft and not rough or thick the furs do push up on the foot, I will try shaving down the sew lines :-) Here's some things to think about. Fur comes...

I am trying to sew a playa coat, every time I try to sew on my machine the thread breaks. I am not sure where to go from here or how to fix. tension etc?

The current draw varies based on the lift or head height you wish to pump the water up to. It is supposed to be a 25 watt pump, drawing 2-2.5 amps there is also one that is a little smaller that draws 1.5 - 2a I am not to worried about the draw, more worried about falling asleep and the pump dry dea...

Hi I am currently working on my bucket cooler and was thinking about using a small boat bilge pump as they can run dry without burning up what do you think of this? I have a 200cfm fan already http://www.amazon.com/Shoreline-Marine-Bilge-Pump-600/dp/B004LRBI9A/ref=sr_1_2?s=boating-water-sports&ie=UT...