Ideas, advice, tips, and tricks regarding shelter, shade, tents, and camping. Yes, this includes RV's too.
Posts: 16
Joined: Fri Apr 15, 2011 12:18 pm
Burning Since: 2011
Location: CA


Postby Noremac.Samoth » Sun Apr 17, 2011 7:10 pm

so ive read all the posts on it and fallowed the links to the original design and am confident i can do it, but i am confused about the rebar? when you put it in the ground do you bend it and the slide the pipe on it? or just hammer it in straight?

thanks so much
we are all one.

User avatar
Posts: 40284
Joined: Mon Feb 23, 2004 9:28 am
Burning Since: 2017
Location: In Exile

Postby theCryptofishist » Sun Apr 17, 2011 7:57 pm

There are differing schools of thought on rebar.
If you just pound it into the ground, it leaves nasty ends that someone could hurt themselves--badly--on.
Here are the typical ways people deal with this:
*put plastic bottles or stuffed animals over the rebar
*"candy cane" it before coming out to the playa
*make some other kind of end, again before coming to the burn.
*taping it to an upright (This is rebar you are using for a shade structure with supports perpendicular to the ground.)

Better explanations of these procedures can be found on this board with the search feature.
The Lady with a Lamprey

"The powerful are exploiting people, art and ideas, and this leads to us plebes debating how to best ration ice.
Man, no wonder they always win....." Lonesomebri

User avatar
Posts: 6748
Joined: Wed Sep 03, 2003 10:00 am
Burning Since: 1986
Camp Name: Royaneh
Location: San Francisco

Postby Bob » Sun Apr 17, 2011 8:30 pm

Please cite the link(s) you found confusing.
Amazing desert structures & stuff:

"Let us say I suggest you may be human." -- Reverend Mother Gaius Helen Mohiam

User avatar
Posts: 35
Joined: Fri Jun 19, 2009 10:33 pm

Postby ZenoBoy » Sun Apr 17, 2011 9:23 pm

I think I understand what you're asking. For the MH the rebar that the PVC slips over on either end of each rib is put in straight. You want to drive the rebar at least half way in, probably just a bit past half way. You want the rebar 90 degrees to the ground.

The Monkey Hut instructions should explain exactly how wide apart the rebar should be depending on the overall width of your structure.

User avatar
Posts: 12001
Joined: Mon Sep 01, 2008 8:33 pm
Burning Since: 2018

Postby Savannah » Mon Apr 18, 2011 9:45 am

Noremac.Samoth, the rebar is indeed pounded straight. The PVC has a little bit of bend to it.

Posts: 16
Joined: Fri Apr 15, 2011 12:18 pm
Burning Since: 2011
Location: CA


Postby Noremac.Samoth » Mon Apr 18, 2011 10:10 am

Yes you guys answered my question! thanks so much Savannah & Zenoboy. and thanks to everyone else for offering help too. I was just confused if it went in the ground straight. Thanks for the help, i very much appreciate it.

we are all one.

User avatar
Posts: 3677
Joined: Sat Nov 06, 2010 5:22 am
Burning Since: 2011
Camp Name: Barbie Death Camp THIRTEENTH BARBIE
Location: Washington, DC

Postby MyDearFriend » Mon Apr 18, 2011 4:48 pm

After about the third time I set up my Monkey Hut (just practicing) I decided, once I had the rebar in as far as it needed to be (poundpoundpoundpound-measure-pound-measure-ok that's good), to take a can of spray paint and paint the part that was showing :oops: so, I can just pound until paint hits ground and then I stop.
"You can be whoever you want to be, and sometimes people laugh and sometimes they clap, and mostly and beautifully they don't really care."

Return to “Building Camps & Villages”

Who is online

Users browsing this forum: ernestpworrell and 8 guests