A silly idea popped into my head the other day. I could build a small sealed cylinder with little ridges inside, put it on a set of bearings and run it from a bicycle. It could use shower and cooler runoff. If a good enough filter could be found, the water could be reused many times.
Has anyone tried anything like this?
I suppose a washboard would be easier, but it doesn't quite have the same coolness factor.
Has anyone set up a washing machine?
-
dragonfly Jafe
- Posts: 1877
- Joined: Tue Sep 02, 2003 11:08 am
- Location: the Oregon Trail
- Desi Arnaz
- Posts: 39
- Joined: Wed Sep 03, 2003 10:53 am
- Location: San Luis Obispo, CA
- DangerMouse
- Posts: 211
- Joined: Tue Sep 16, 2003 11:27 am
- Burning Since: 2004
- Camp Name: Bacon Lube - The 8th Food Group
- Location: Seattle, WA
-
dragonfly Jafe
- Posts: 1877
- Joined: Tue Sep 02, 2003 11:08 am
- Location: the Oregon Trail
Then you would have a spin dryer also!DangerMouse wrote:And what if it hit say, a stray piece of rebar and sprung a leak?dragonfly Jafe wrote:Or how about a sealed cylinder that is mounted on an axle, like a lawn roller, that is pulled behind your bike? Do your wash and see the sights! And make the Playa flatter! regards, Jafe
regards, Jafe