Honda Generator Owners...
- cahlm
- Posts: 83
- Joined: Fri Jul 23, 2010 4:59 pm
- Burning Since: 2004
- Camp Name: Geodesia
- Location: Reno
Honda Generator Owners...
Just got mine in the mail and was wondering about the air filter vs. playa dust. Are you guys cleaning the filter at all during the week? Using a different filter all together? Shed a little light please... 
-
BurningRando
- Posts: 47
- Joined: Mon Sep 28, 2009 12:46 pm
- Location: Boston, MA
They are washable foam filters.
I do not change mine on playa but clean and oil them before and after.
If its a brand new unit, might want to run it for a day on a moderate load just to get the first oil change and break-in done before the playa.
Ultimately, its good to have spares for the filter and spark plug.
I do not change mine on playa but clean and oil them before and after.
If its a brand new unit, might want to run it for a day on a moderate load just to get the first oil change and break-in done before the playa.
Ultimately, its good to have spares for the filter and spark plug.
- TomServo
- Posts: 6160
- Joined: Wed Dec 01, 2004 1:17 pm
- Burning Since: 1999
- Camp Name: Black Rock City Assholes Union Local 668
- Location: Las Vegas, Nevada
EU 3000? Great fucking generators! Like I said, put it on a tarp! The vibration will stir up dust.cahlm wrote:Nah, that's plenty of help. And yes, I did pay a pretty penny for it. I was gonna go with a cheapo but I want it to last for more than a couple days, if that. Plus I respect my neighbors enough to buy Honda.
anything worth doing is worth overdoing..
- cahlm
- Posts: 83
- Joined: Fri Jul 23, 2010 4:59 pm
- Burning Since: 2004
- Camp Name: Geodesia
- Location: Reno
Yeah, that was my other question. I'm in Reno so I don't think the elevation change is too drastic, but I still would like to get the full power rating. How do you guys feel about the Eco-Mode? It's quiet, that's for certain, but is it efficient?Megaflow wrote:you might want to get a smaller main jet for the carburetor. Honda sells one to be used at higher altitude. It does make a difference on the playa.
It is a matter of elevation above sea level. I remember checking it, and as I recall... the recommended change-over elevation was a bit higher than BRC. But perhaps it would still be beneficial to change.
I think I always use eco-mode. Perhaps if you keep triggering a large power tool or some such, you might want to let it run at full tilt for instant response, but I don't know why else.

I think I always use eco-mode. Perhaps if you keep triggering a large power tool or some such, you might want to let it run at full tilt for instant response, but I don't know why else.
- Stickygreen
- Posts: 307
- Joined: Wed Feb 20, 2008 12:17 pm
- Location: Vancouver
EU3000is owner, and yes eco mode is way better for noise reduction, but if your using it to run a sound system then leave it off. Every time one of the sub's needs a big draw of power, you want it to be there. This isn't always possible with eco mode..
if your just using it to run lights, and general camp stuff, then eco mode is the way to go.
on the 3000is the filter is not washable, but I don't bring a spare, it will last for the week. I change mine when i get home. oh, and change the oil to.
if your just using it to run lights, and general camp stuff, then eco mode is the way to go.
on the 3000is the filter is not washable, but I don't bring a spare, it will last for the week. I change mine when i get home. oh, and change the oil to.
)'(
- Kinetik V
- Posts: 1652
- Joined: Fri Sep 07, 2007 10:43 am
- Burning Since: 2002
- Camp Name: Sanctuary West
EU2000i here, had it for a couple of years now. I use Captain Goddammit's extended fuel tank solution (search the ePlaya for how to rig up extended run time fuel tanks) and once I start it I don't turn it off until I'm done packing up. (5-8 days of 24x7 operation) When I get home I clean the filter, change the oil and that's it. Only once did a dust storm shut it down, I pulled the filters out, beat them against the side of the truck, put them back in and fired it back up. (For the record I've run my unit 17 days straight without shutting it off. I use Mobil 1 synthetic oil in it, and it never shut down due to low oil and it was running at max power draw)
As for changing the jets, the playa is approximately 4000 ft in elevation (Gerlach, NV's official elevation is 3944 ft). On the EU2000i Honda makes a jet, 99101-ZG0-0600 that is optimized for 4000 to 7000 ft that should set you back about $6 if you want to make the change for maximum efficiency. That being said I operate mine at 8400 ft of elevation consistently with the factory installed jets and while theory says you lose 3% HP for every 1000 ft of elevation I can still operate all of my equipment without fuss.
In short you bought the best generator on the market, IMHO...and it will serve you well.
Oh and if you do have a EU3000i that's newer than 2009, the 4000 / 7000 ft high altitude jet number is 99101-ZH8-0750. And one last thing...Stickygreen is spot on. Eco-throttle doesn't ramp up as fast as many people would like when hit with a heavy load. If you're running it close to the max leave eco-throttle OFF.
As for changing the jets, the playa is approximately 4000 ft in elevation (Gerlach, NV's official elevation is 3944 ft). On the EU2000i Honda makes a jet, 99101-ZG0-0600 that is optimized for 4000 to 7000 ft that should set you back about $6 if you want to make the change for maximum efficiency. That being said I operate mine at 8400 ft of elevation consistently with the factory installed jets and while theory says you lose 3% HP for every 1000 ft of elevation I can still operate all of my equipment without fuss.
In short you bought the best generator on the market, IMHO...and it will serve you well.
Oh and if you do have a EU3000i that's newer than 2009, the 4000 / 7000 ft high altitude jet number is 99101-ZH8-0750. And one last thing...Stickygreen is spot on. Eco-throttle doesn't ramp up as fast as many people would like when hit with a heavy load. If you're running it close to the max leave eco-throttle OFF.
- Abraham Lincoln
- Posts: 16
- Joined: Thu Aug 03, 2006 1:42 am
I've been bringing an EU1000i (similar to the 2000, but vastly different from the 3000) since 2006. Overall, it's held up though conditions that would have ruined any other genset, though it hasn't been free of problems. My advice would be to install a fuel filter right after the gas tank as they are inexpensive and will prevent playa dust sludge from entering the fuel pump/carburetor/etc and gumming everything up. I know that the 1000 and 2000 do not have a fuel filter installed; I'm unsure about the 3000.
I bring one or two spare air filters as they are cheap and it's best to come prepared. That being said, I've only had to replace the air filter once after running the generator through a particularly brutal whiteout in 2007.
Usually I do an oil change mid event, but that's just because I'm paranoid and it gives me something to do on Thursday afternoon when it's too hot and I'm too hung over to leave camp. I usually check the oil level once per day just to make sure it isn't low, but I don't recall ever having to top it off.
This year I built a generator box for it with a baffled exhaust port and forced air circulation that uses a large truck air filter to pre-filter the air before it gets to the generator. Probably overkill for most people- I'm testing the design for an art installation we're bringing up next year. I'll post pics later.
I bring one or two spare air filters as they are cheap and it's best to come prepared. That being said, I've only had to replace the air filter once after running the generator through a particularly brutal whiteout in 2007.
Usually I do an oil change mid event, but that's just because I'm paranoid and it gives me something to do on Thursday afternoon when it's too hot and I'm too hung over to leave camp. I usually check the oil level once per day just to make sure it isn't low, but I don't recall ever having to top it off.
This year I built a generator box for it with a baffled exhaust port and forced air circulation that uses a large truck air filter to pre-filter the air before it gets to the generator. Probably overkill for most people- I'm testing the design for an art installation we're bringing up next year. I'll post pics later.
- Abraham Lincoln
- Posts: 16
- Joined: Thu Aug 03, 2006 1:42 am
The intake uses four AC muffin fans rated somewhere around 107cfm... not sure what their mmHG rating is. The intake filter is a large FRAM CA7640 which is used on large diesel engines, Dodge and Bobcat I think. The exhaust is a 9" baffled roof vent for a house. Everything was gorilla glued and screwed together- overbuilt for the playa. It will fit both the 1000i (as pictured) and the 2000 should I end up getting one in the future. Trials have shown that the fans generate significant positive air pressure in the box, even with large volume of exhaust coming out the back, but I think I'm going to put some kind of seal around the lid.
I'm going to vandal proof it by running some 3' candy cane rebar though 1" holes in the bottom and probably put some kind of heavy duty latch with combo lock on the lid.
I guess this counts as my overkill be-all-end-all playa dust killer for my Honda. Hopefully I don't have to redesign it too much for next year's art project.
Pics:






I'm going to vandal proof it by running some 3' candy cane rebar though 1" holes in the bottom and probably put some kind of heavy duty latch with combo lock on the lid.
I guess this counts as my overkill be-all-end-all playa dust killer for my Honda. Hopefully I don't have to redesign it too much for next year's art project.
Pics:






- Abraham Lincoln
- Posts: 16
- Joined: Thu Aug 03, 2006 1:42 am
cahlm- I think you'll be pleasantly surprised at how nice/quiet/reliable the Honda is in comparison other generators. Yamaha supposedly makes good inverter gensets, but I haven't seen too many or had any hands on experience with one. Also, your neighbors will unknowingly love you for your decision as well. I've had neighbors in years past mistakenly think our camp was powered by solar- a testament to how quiet these things really are, especially amidst the sea of noise out there.
geekster- do you have any suggestions or alterations to recommend? Anything you would have changed about the generator box in your camp?
I'm still thinking about painting it... Maybe an Arc of the Covenant themed paint job (a-la Indiana Jones)? Anyone have any suggestions on heavy-duty weather seal paint?
geekster- do you have any suggestions or alterations to recommend? Anything you would have changed about the generator box in your camp?
I'm still thinking about painting it... Maybe an Arc of the Covenant themed paint job (a-la Indiana Jones)? Anyone have any suggestions on heavy-duty weather seal paint?
- Stickygreen
- Posts: 307
- Joined: Wed Feb 20, 2008 12:17 pm
- Location: Vancouver
this is an excellent suggestion. last year I got about 3 or 4 tablespoons of playa dust (sludge) in my generators fuel tank. I know the exact amount of playa that got in there cause not only did i need to remove the tank to get the playa out, i needed to replace the tank, due to a hole that had rusted through... but the thing is 5 years old, and also i discovered that when playa and gasoline mix, it makes a very corrosive combo, leaving the tank empty for a few months after BM09 wasn't the smartest idea...Abraham Lincoln wrote: My advice would be to install a fuel filter right after the gas tank as they are inexpensive and will prevent playa dust sludge from entering the fuel pump/carburetor/etc and gumming everything up. I know that the 1000 and 2000 do not have a fuel filter installed; I'm unsure about the 3000.
live and learn, i guess. the tank was $300 and the experience of tearing my machine down was a good learning experience. I now know where everything is, and I have the confidence to field strip the thing if need be.
)'(
- Abraham Lincoln
- Posts: 16
- Joined: Thu Aug 03, 2006 1:42 am
Post burn report on the generator box!
Good news and bad news:
THE BAD. In my rush to leave, I FORGOT THE FUCKING FILTER. GODDAMNIT. After beating myself up for a few hours (and several shots of strong whiskey... and trying to barter with random participants walking down the street for a FRAM CA7640 in exchange for cold drinks... and traumatizing a first year with a lengthy tirade about air filters... and several more shots of strong whiskey) I caved in and fired the generator up sans filter.
THE GOOD. At the end of the week, everything in the box was considerably less playafied when compared to things sitting out in the open. The air filter and fuel filter in the generator were almost clean; there was only a slight tinge of white around the intakes, but no substantial accumulation of playa inside the chassis of the genset or on the floor of the box. SUCCESS!
I brought back a couple handfuls of playa dust, which I plan on throwing forcefully into the filter while the fans are running to test it after-the-fact. Overall, I'm fairly happy with the results, considering that with a filter (and possibly Capt. Goddamnit's fuel tank expansion) the box will be ready to provide power to our installation on the playa next year reliably and safely with little supervision.
Good news and bad news:
THE BAD. In my rush to leave, I FORGOT THE FUCKING FILTER. GODDAMNIT. After beating myself up for a few hours (and several shots of strong whiskey... and trying to barter with random participants walking down the street for a FRAM CA7640 in exchange for cold drinks... and traumatizing a first year with a lengthy tirade about air filters... and several more shots of strong whiskey) I caved in and fired the generator up sans filter.
THE GOOD. At the end of the week, everything in the box was considerably less playafied when compared to things sitting out in the open. The air filter and fuel filter in the generator were almost clean; there was only a slight tinge of white around the intakes, but no substantial accumulation of playa inside the chassis of the genset or on the floor of the box. SUCCESS!
I brought back a couple handfuls of playa dust, which I plan on throwing forcefully into the filter while the fans are running to test it after-the-fact. Overall, I'm fairly happy with the results, considering that with a filter (and possibly Capt. Goddamnit's fuel tank expansion) the box will be ready to provide power to our installation on the playa next year reliably and safely with little supervision.
- Pink Daddy
- Posts: 271
- Joined: Mon Sep 04, 2006 5:21 pm
- Location: San Diego, CA
- Contact:
Consider yourself fortunate.
Our camp art car runs off of a Honda 3000. It powers the internal/external lights, the battery charger, half of the sound system, plus the electronics for the fire poofers. We took off for the first evening's cruise without realizing that the filter wasn't installed in the generator. It's stored in a box below the platform, but it's location makes it prone to a large amount of dust intake. Luckily, our camp mechanic and mastermind was able to clean enough of the generator to get it started again. He let it run to try and clear out some of the playa dust. One of our other campmates suggested doing an oil change immediately, but we were surprisingly low on oil.
After we got the generator working again, we had to replace the filter at least three times during the week.
Our camp art car runs off of a Honda 3000. It powers the internal/external lights, the battery charger, half of the sound system, plus the electronics for the fire poofers. We took off for the first evening's cruise without realizing that the filter wasn't installed in the generator. It's stored in a box below the platform, but it's location makes it prone to a large amount of dust intake. Luckily, our camp mechanic and mastermind was able to clean enough of the generator to get it started again. He let it run to try and clear out some of the playa dust. One of our other campmates suggested doing an oil change immediately, but we were surprisingly low on oil.
After we got the generator working again, we had to replace the filter at least three times during the week.
San Diego Co-Regional Contact (E-mail: [email protected]) - Camp Inspiratum - What inspires you?
[img]http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs377.snc4/46069_461193081927_501436927_6807820_1244164_n.jpg[/img]
[img]http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs377.snc4/46069_461193081927_501436927_6807820_1244164_n.jpg[/img]
Have not looked at the air filter yet, but my EU3000 used no oil while running non stop from Sunday morning pre- to Tuesday afternoon post-. Consumed 27 (or 29?) gallons of gasoline, running mostly at its famously quiet idle.
Its primary load was a full size refrigerator, which drew next to no juice. When the fridge kicked in, the start-up draw just barely make the EU3000 grunt off idle for an instant.
Occasionally we ran tools like a chop saw and an air compressor. And a microwave oven -- which drew a surprising (to me) amount of juice.
Only time I switched it off "Eco" mode was when I needed to cut a big hunk of iron with the chop saw.
I refueled it routinely morning and evening, but it was often still half full.
The refrigerator really "made" our burn. No wasting precious BRC time standing in line to buy ice. No spoiled food. Ice cream and fresh watermelon all week.
I know this sounds like a Honda commercial, but dang... this thing is worth the money.
- Captain Goddammit
- Posts: 8589
- Joined: Sat Sep 06, 2003 9:34 am
- Burning Since: 2000
- Camp Name: First Camp
- Location: Seattle, WA
I LOVE the generator box! I'm going to make a larger copy of it for a pair of 2000s. Honda EUs are quiet - even quieter is even better, less dust is better, but the security aspect of anchoring the box down and locking it up is perhaps the best benefit.
Everyone should do the external fuel tank thing. http://ilynne.com/captaingoddammit/
I need to update that set of instructions, I'm not 100% happy with that exact method of plumbing the fuel line through the Honda gas cap.
One of the biggest benefits of the extra tank is that you can filter the fuel supply before it gets to the Honda at all, and you never have to open the Honda's tank.
Everyone should also make their own parallel operation cables, Honda's are a rip-off. The "parallel operation ports" on a Honda EU are simply wired directly to the regular power outlets on the front of the set. You can use nothing more than a short extension cord with the female end cut off and replaced with another male, then plug one end into each Honda. Better yet, buy two 12-gauge power-tool replacement cords from Home Depot and run both into a junction box onto which you've installed whatever outlets you want (I have an RV-style 30-amp outlet on mine so my camper plugs in without one of those
adapters).
The main thing you need to know about operating two (or more) Hondas hooked together is start-up sequence. Connect both sets FIRST, THEN start either or both engines. Don't connect them while they are already running.
You can connect different size Honda EUs, I've run EU1000, EU2000 and EU3000s together in different match-ups and they all play nice together.
Once connected, you can start/stop either set anytime at all. You can run just one and just start the second one when you're gonna be using your microwave or whatever.
The only other caution in doing this is remember that with a double-male connector cord, if you unplug one end with the other end plugged into a running generator, you will have exposed, live terminals. Don't touch them and kill yourself.
A cool thing about running two is that even when you are only drawing a moderate amount of power (that just one set would handle), two units barely idling sound nicer than one unit throttled up, and with two you can usually get away with using Eco-Throttle mode even when you want to run power saws and other large start-up-power items.
Everyone should do the external fuel tank thing. http://ilynne.com/captaingoddammit/
I need to update that set of instructions, I'm not 100% happy with that exact method of plumbing the fuel line through the Honda gas cap.
One of the biggest benefits of the extra tank is that you can filter the fuel supply before it gets to the Honda at all, and you never have to open the Honda's tank.
Everyone should also make their own parallel operation cables, Honda's are a rip-off. The "parallel operation ports" on a Honda EU are simply wired directly to the regular power outlets on the front of the set. You can use nothing more than a short extension cord with the female end cut off and replaced with another male, then plug one end into each Honda. Better yet, buy two 12-gauge power-tool replacement cords from Home Depot and run both into a junction box onto which you've installed whatever outlets you want (I have an RV-style 30-amp outlet on mine so my camper plugs in without one of those
adapters).
The main thing you need to know about operating two (or more) Hondas hooked together is start-up sequence. Connect both sets FIRST, THEN start either or both engines. Don't connect them while they are already running.
You can connect different size Honda EUs, I've run EU1000, EU2000 and EU3000s together in different match-ups and they all play nice together.
Once connected, you can start/stop either set anytime at all. You can run just one and just start the second one when you're gonna be using your microwave or whatever.
The only other caution in doing this is remember that with a double-male connector cord, if you unplug one end with the other end plugged into a running generator, you will have exposed, live terminals. Don't touch them and kill yourself.
A cool thing about running two is that even when you are only drawing a moderate amount of power (that just one set would handle), two units barely idling sound nicer than one unit throttled up, and with two you can usually get away with using Eco-Throttle mode even when you want to run power saws and other large start-up-power items.
GreyCoyote: "At this rate it wont be long before he is Admiral Fukkit."
- oneeyeddick
- Posts: 5589
- Joined: Wed Oct 24, 2007 6:08 pm
- Burning Since: 1996
- Location: Probably in your pants
The trick for making a mechanical seal for the gas cap is to use a drill bit slighly smaller than the barb you are going to use, then heat up the hole by "wiggling" the exposed metal(not the cutting treads)part of the drill bit till it makes the plastic malleable...it doesn't take very much friction, and then simply slam the hose barb through with a hammer.
The platic cap makes it's own seal around the barb after it cools down
I have done this to 3 caps now for other peoples gennies, as well as my own, all with success, no glue or sealant or washers required.
The platic cap makes it's own seal around the barb after it cools down
I have done this to 3 caps now for other peoples gennies, as well as my own, all with success, no glue or sealant or washers required.
We have an obligation to make space for everyone, we have no obligation to make that space pleasant.
- oneeyeddick
- Posts: 5589
- Joined: Wed Oct 24, 2007 6:08 pm
- Burning Since: 1996
- Location: Probably in your pants
Fuel caps
There is an outfit on ebay selling CNC machined aluminum fuel caps that fit our honda type generators. These caps are already tapped for a proper pipe thread. The caps are about 2x as expensive as buying spare honda caps and hacking them up yourself. After running out of time I bought a full dual extended tank kit from these guys. They came with full shut-off quick disconnects and tank. I added fuel filters.
Worked great this year! Ditto for the person who suggested fuel filters inline inside the generators. I got some crud in my float needle, flooded the engine, fouled the plug and killed my generator. Luckily I can disassemble and clean a carb and had spare plugs. Inline filters are my next and final mod to this setup.
Oh... I had two kipor gennies (the chinese honda knockoffs), not the hondas. They worked great for me.
--Chris
Worked great this year! Ditto for the person who suggested fuel filters inline inside the generators. I got some crud in my float needle, flooded the engine, fouled the plug and killed my generator. Luckily I can disassemble and clean a carb and had spare plugs. Inline filters are my next and final mod to this setup.
Oh... I had two kipor gennies (the chinese honda knockoffs), not the hondas. They worked great for me.
--Chris
- Martiansky
- Posts: 3436
- Joined: Thu Dec 04, 2003 5:24 pm
- Burning Since: 2005
- Camp Name: --->Hushville
- Location: Duluth, MN
- Elderberry
- Moderator
- Posts: 14976
- Joined: Tue Jul 17, 2007 10:00 pm
- Burning Since: 2007
- Camp Name: Camp Kelly
- Location: Palm Springs
- Contact:
I'm pretty sure the "i" is for Inverter , "S" is for electric start, "C" is cycloconverter. The only "companion" generator on their site has a 30Amp plug for hooking two generators together.Martiansky wrote:Can anyone tell me what the difference is between the.....
EU2000i,EU2000ia,EU2000companion...?
I saw on ebay that theres a conversion kit to run the genny off propane.
Anybody tried that?
Thanks.
I didn't see the "a" distinction, so maybe it's for an older model?
http://www.hondapowerequipment.com/prod ... tegory=all
Elderberry
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me