Just stumbled onto this. Thought it might come in handy.
Are you using the correct adhesive?
-
Elderberry
- Moderator
- Posts: 14976
- Joined: Tue Jul 17, 2007 10:00 pm
- Burning Since: 2007
- Camp Name: Camp Kelly
- Location: Palm Springs
- Contact:
Are you using the correct adhesive?
You do not have the required permissions to view the files attached to this post.
Elderberry
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me
Re: Are you using the correct adhesive?
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
-
The Rod
- Posts: 1286
- Joined: Fri Jul 30, 2010 8:03 pm
- Burning Since: 2010
- Camp Name: THREAT
- Location: USA
Re: Are you using the correct adhesive?
Holy crap.
"From each according to their ability and to each according to their needs" - Groucho Marx
if god can kill his only son you should be allowed to kill yours
if god can kill his only son you should be allowed to kill yours
-
illy dilly
- Posts: 4900
- Joined: Wed Feb 17, 2010 11:02 am
- Burning Since: 2009
- Camp Name: Gnome Dome
- Location: Denver, CO
Re: Are you using the correct adhesive?
Very helpful chart JK!
Apparently 2 part epoxy isn't always the best answer- who knew.
Apparently 2 part epoxy isn't always the best answer- who knew.
Why don't ya stick your head in that hole and find out? ~piehole
Plan for the worst, expect the best. Make the most out of it under any conditions. If you cannot do that you will never enjoy yourself. ~CrispyDave
Plan for the worst, expect the best. Make the most out of it under any conditions. If you cannot do that you will never enjoy yourself. ~CrispyDave
Re: Are you using the correct adhesive?
Did not see any urethane adhesives in there. I use them, for example, to bond fiberglass to metal as they have very high shear strength due to being more compliant than epoxies. Never had a failure yet and no distortion of the fiberglass over time.
I would like to treat my gas pedal as a binary operator and get the cooperation of everyone in front of me!
-
Elderberry
- Moderator
- Posts: 14976
- Joined: Tue Jul 17, 2007 10:00 pm
- Burning Since: 2007
- Camp Name: Camp Kelly
- Location: Palm Springs
- Contact:
Re: Are you using the correct adhesive?
I don't even see fiberglass in the list of materials to be glued. Wasn't in the link that figjam posted either.
Elderberry
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me
When I was a kid I used to pray every night for a new bicycle.
Then I realized that the Lord doesn't work that way so I stole one and asked Him to forgive me
-
DoctorIknow
- Posts: 861
- Joined: Thu Aug 26, 2004 3:07 pm
- Burning Since: 1998
- Camp Name: Camp Do Nothing
- Location: Thailand/Sacramento
Re: Are you using the correct adhesive?
In the above chart, I see styrofoam being bonded with hot glue......
Is it only me that the hot glue melts the styrofoam?
Is it only me that the hot glue melts the styrofoam?
Re: Are you using the correct adhesive?
And I thought that was odd.Elderberry wrote:I don't even see fiberglass in the list of materials to be glued. Wasn't in the link that figjam posted either.
I would like to treat my gas pedal as a binary operator and get the cooperation of everyone in front of me!
-
rasta979
- Posts: 18
- Joined: Fri Jun 24, 2016 12:24 pm
- Burning Since: 2016
- Location: In The Missouri Woods
Re: Are you using the correct adhesive?
Nice, this will be handy for all kinds of stuff! Thanks!