Looking for two gas powered post drivers

Ideas, advice, tips, and tricks for making installations of all sizes or making smaller pieces and jewelry.
Post Reply
User avatar
soaringDude
Posts: 17
Joined: Sun Oct 12, 2014 10:47 am
Burning Since: 2014
Camp Name: Camp Porta Party
Location: East Bay
Contact:

Looking for two gas powered post drivers

Post by soaringDude » Sat May 27, 2023 7:02 pm

A small group of us are bringing an art installation to the playa this year called Zhina (https://zhinaart.com). We need a couple of gas powered post drivers to drive 1.5" pipes (OD 1.9") to pound 60 12' posts 3' deep in the playa.

We don't have enough money to buy two new ones at around $1500 each and figured it is worth asking here, maybe we find one or two that are sitting in someone's garage or barn somewhere. I would love to borrow, rent, or buy one or two of them. If you have any connections or know of one somewhere please connect me with them. Any help is greatly appreciated.

And just to make sure it is clear, this is an example of driver I am looking for:

https://www.skidril.com/g20d.htm

User avatar
Lonesomebri
Posts: 2890
Joined: Wed Jun 13, 2012 5:54 pm
Burning Since: 2024
Camp Name: CAMP THREAT
Location: NorCal

Re: Looking for two gas powered post drivers

Post by Lonesomebri » Sun May 28, 2023 6:46 am

For whatever reason your link didn't go thru for me. Good luck with your quest.

http://www.skidril.com/g20d.htm
Camp THREAT founder. BRCCP core disgruntled member. Burner. Setting fires since 1974. https://www.facebook.com/profile.php?id ... tid=ZbWKwL
"If this is the best of all possible worlds, what are the others?"
- Voltaire

User avatar
soaringDude
Posts: 17
Joined: Sun Oct 12, 2014 10:47 am
Burning Since: 2014
Camp Name: Camp Porta Party
Location: East Bay
Contact:

Re: Looking for two gas powered post drivers

Post by soaringDude » Sun May 28, 2023 12:08 pm

Thanks for correcting the link 🙏

whichitchy
Posts: 1
Joined: Sun Jan 21, 2024 6:56 pm
Burning Since: 2023

Re: Looking for two gas powered post drivers

Post by whichitchy » Sun Jan 21, 2024 6:59 pm

Lonesomebri wrote:
Sun May 28, 2023 6:46 am
For whatever reason your link didn't go thru for me. Good luck with your quest.

http://www.skidril.com/g20d.htm
I appreciate you fixing the link.

User avatar
soaringDude
Posts: 17
Joined: Sun Oct 12, 2014 10:47 am
Burning Since: 2014
Camp Name: Camp Porta Party
Location: East Bay
Contact:

Re: Looking for two gas powered post drivers

Post by soaringDude » Sun Jan 21, 2024 9:46 pm

Just for archival reason and maybe to help someone with the same question. This worked almost perfectly for us. We installed 43 12' tall 2"SCH40 steel pipes 3' into the playa with great Percision and most came out pretty square and level. It wasn't easy but totally doable. I think we were driving posts for maybe a little bit over a solid day with two crews running two post drivers. 4 people/10-11 hours total work.

Some posts didn't go in the full 3', guessing we hit some rock or a particularly layer of hard playa so we ended up cutting a few inches off the top of a few of them but all went in over 2.5' easily.

Taking the posts out was less than a min with high lift jack with a custom bracket and chain. Teardown was a breeze.

Image

Phoebeynch
Posts: 1
Joined: Fri Jul 12, 2024 1:12 am
Burning Since: 1998
Camp Name: Phoebe Lynch

Re: Looking for two gas powered post drivers

Post by Phoebeynch » Fri Jul 26, 2024 1:48 am

soaringDude wrote:
Sat May 27, 2023 7:02 pm
A small group of us are bringing an art installation to the playa this year called Zhina (https://zhinaart.com). We need a couple of gas powered post drivers to drive 1.5" pipes (OD 1.9") to pound 60 12' posts 3' deep in the playa.

We don't have enough money to buy two new ones at around $1500 each and figured it is worth asking here, maybe we find one or two that are sitting in someone's garage or barn somewhere. I would love to borrow, rent, or buy one or two of them. If you have any connections or know of one somewhere please connect me with them. Any help is greatly appreciated.

And just to make sure it is clear, this is an example of driver I am looking for:

https://www.skidril.com/g20d.htm
Are you still recruiting 2 more drivers?

User avatar
soaringDude
Posts: 17
Joined: Sun Oct 12, 2014 10:47 am
Burning Since: 2014
Camp Name: Camp Porta Party
Location: East Bay
Contact:

Re: Looking for two gas powered post drivers

Post by soaringDude » Fri Jul 26, 2024 1:59 am

Phoebeynch wrote:
Fri Jul 26, 2024 1:48 am

Are you still recruiting 2 more drivers?
Thank you for responding but no, we are not bringing Zhina to the playa this year.

Post Reply

Return to “Building & Making Art”