Project

Moonpie · Post by **Moonpie** » Fri Sep 21, 2007 8:52 am

I'm looking to make a standing candelabra about 6 feet tall with 5 "arms" that can "poof" fire.

honeyfire · Post by **honeyfire** » Fri Sep 21, 2007 10:46 am

...and... ?

Teo del Fuego · Post by **Teo del Fuego** » Fri Sep 21, 2007 10:55 am

and...she's looking for technical advice onhow to build it.

Wish I could help ya... I cant wait to see it on the Playa. Good luck!

oneeyeddick · Post by **oneeyeddick** » Sat Dec 01, 2007 7:34 pm

Well first off, you're probably gonna need some propane.
Next ?
Anyone ?

draconispax · Post by **draconispax** » Sat Dec 01, 2007 7:42 pm

some tubing and an ignition system?

Post by **mdmf007** » Sat Dec 01, 2007 7:54 pm

also a Regulator, Tank, and Accumulator. for poof effects, servo powered valve or just a simple hand powered valve if you wnat to stand there and do it yourself every time.

motskyroonmatick · Post by **motskyroonmatick** » Sun Dec 02, 2007 12:06 am

I'm imagining pilot flames in the middle of where the candle base would be and the tubing making up the body acting as the accumulator with electronic valves at each candle stick to release large bursts.

Post by **mdmf007** » Sun Dec 02, 2007 9:16 am

sounds cool -

if you use copper tubing you can form it into hatever shape you need, soldering whatever connections as needed to the ends. copper can also be stained to look like old brass, black as coal, aged to look like its 200 years old etc.

Project

Project

your subject line is AWFULLY vague, honey...