Post
by DoctorIknow » Wed Apr 05, 2017 6:46 am
I've seen them used, never that short, and always with a very slow turning specialized tool that slips over the top.
Doing them with a long bar could be possible until you get close to the ground, as of course you should put them in at an angle.
And, they are short and need to go all the way in, maybe even make the eye below the playa surface.
Free is good, but I would certainly borrow a piece of steel like weight lifting bar, or a 1" rebar piece and see if one person can do it.
I used a crowbar to remove a auger twice as long, and I'd never want to do that again.