Exciting new deburring solutions!

phil · Post by **phil** » Thu Mar 23, 2006 12:05 pm

For all you metal benders/cutters/shapers/whatever, here's an exciting new tool that also deburs all those holes you drill in PVC, all those pipes you've so carefully cut to just a half-inch too short (plastic or metal):

http://www.shaviv.com/new_shav.asp?num=3

For the rest of us, ZZZZZZZZZZNNNNXXXX

robotland · Post by **robotland** » Thu Mar 23, 2006 3:39 pm

Thanks for makin' me smile, Phil. Anyone who DOESN'T get excited about deburring is short a bushel o' neurons, in MY book.

I just wish that deburring could effect the weather in these parts.

Deburring DID do wonders for removing most of Raymond's part from the original Godzilla, though.

phil · Post by **phil** » Thu Mar 23, 2006 5:24 pm

robotland wrote:I just wish that deburring could effect the weather in these parts.

Now see, that's where you Kalamazooites get it all wrong. It's "debrrrrring"!
Sheesh. No wonder it's so cold there. We Californians debrrrrred long ago.

regionalchaos · Post by **regionalchaos** » Fri Mar 24, 2006 11:06 am

I'm just using a dremel tool with a metal grinder attachment. Seems to work well for me. Just a little time consuming, seeing as how I have 175~ struts with two holes each to deburr.

robotland · Post by **robotland** » Fri Mar 24, 2006 1:36 pm

phil wrote:
robotland wrote:I just wish that deburring could effect the weather in these parts.
Now see, that's where you Kalamazooites get it all wrong. It's "debrrrrring"!
Sheesh. No wonder it's so cold there. We Californians debrrrrred long ago.

PLEASE. It's Kazooans- Or Azons, after our airport designation, AZO. And we're Michiganders, NOT "Michiganians". (Or "Michugginers", as some Israelites have suggested.) Or Trolls, 'cuz we're "under the bridge".

Regionalchaos- Instead of deburring my boltholes, I smack the strut ends with my strut-flattening 3 pound hammer after drilling...It mashes the standing sharpies down, and threading a bolt through later does the rest. When deburring the cut ends of my EMT, I hit the worst ones with a round file. (A halfround just gets stuck, and takes too long.)

phil · Post by **phil** » Fri Mar 24, 2006 1:41 pm

I think michugginers is probably accurate after watching that case of Fosters disappear. :-)

robotland · Post by **robotland** » Fri Mar 24, 2006 1:52 pm

phil wrote:I think michugginers is probably accurate after watching that case of Fosters disappear.

I had to drink them....Dave needed a costume!!