Glue no poop on goop

unjonharley · Post by **unjonharley** » Sun Apr 01, 2007 7:44 pm

Looking for a very thin glue..Is there any that comes in a pressure can?

Tiahaar · Post by **Tiahaar** » Sun Apr 01, 2007 10:50 pm

Like a light trim adhesive? 3M Super 77 is a mist spray, or their 08090 Super Trim Adhesive has a lace-pattern spray for headliners & such. A Craft/hobby store would have something similar. Hey I'm glueing up foil/insulating headliner in my old bus, going through cans of the Sticky Stuff brand.

gyre · Post by **gyre** » Mon Apr 02, 2007 12:32 am

Schnee-Morehead has some unusual stuff.
What are you trying to do?

robotland · Post by **robotland** » Mon Apr 02, 2007 5:46 am

Got ME curious....

unjonharley · Post by **unjonharley** » Mon Apr 02, 2007 6:20 am

They don't make any sign vinyl in the right color shade.. So I want to put colored craft paper on a door skin..The wood has some texture to it..The back of the is pretty slick..I can trim the edges so the wind wont get under it..But have to work with to many bubble using paste/or type glue.. Looks like 3M has what I want..Thanks guys, Save me gas, not having to run around looking

robotland · Post by **robotland** » Mon Apr 02, 2007 6:25 am

To reduce air bubbles, assemble a few simple tools- A plastic squegee, like the type for smoothing Bondo; A pin, for popping bubbles; A scrap of plastic (YES- a shopping bag will work...). As you apply the vinyl, push the air bubbles out with the scraper. The plastic can be used as a buffer-layer to avoid tearing or scratching.

Bob · Post by **Bob** » Mon Apr 02, 2007 12:18 pm

Rubber brayer.

And why can't you mask off and use plain old rubber cement? Is this being shot into space?

gyre · Post by **gyre** » Mon Apr 02, 2007 1:03 pm

3M I'd say.
They have some adhesive for brake pads in an aerosol that's real grippy.
This is for playa wind, right?
Any of the non-temporary 3M should work.

I don't think it comes in aerosol but 3M weatherstripping adhesive might do it.

unjonharley · Post by **unjonharley** » Mon Apr 02, 2007 2:12 pm

I checked out 3M 77 per Tiahaar.. It was the only premanet craft glue in a can..It's workig good..Tanks guys