Protecting MV stereo equipment from dust
Protecting MV stereo equipment from dust
This will be my MV's third trip to the playa. It seats four and is based off a golf cart, so it's not big. My first attempt at a sound system (an iPod hooked up to some lame little speakers powered by AA batteries) died before I even hit the open playa due to dust. I am considering purchasing a weatherproof system that is marketed to Off-Road vehicles that get wet. It's pricey, but wondering if that's the best way to go. These systems are encased in fiberglass and the company advertises they can be dipped in water and still survive. Or, if I buy a regular car stereo with an amp and speaks, how do I protect the units from dust? I've seen other vehicles encase theirs in plexiglass. Are there other options? Any advice from some experienced mutant vehicle sound folks would be awesome. Thanks so much! The man burns in 146 days )"(
- Trishntek
- Posts: 3462
- Joined: Wed Jan 13, 2010 9:27 pm
- Burning Since: 2010
- Camp Name: Retrofrolic!
- Location: Ventura, CA, USA
- Contact:
Re: Protecting MV stereo equipment from dust
I do not have an MV, but there are some robust 2:1 sound systems for computers that are pretty good sound with a power woofer and 2 satellites. Use a 12V deep cycle battery and a 400W inverter. For $200, you can have a decent 200W system that plugs right into your ipod. $300 including the battery and inverter.
RETROFROLIC, the place of Pink, Pain and Pleasure!
http://www.retrofrolic.com
Some call me Tnt,,,, works for me!
http://www.retrofrolic.com
Some call me Tnt,,,, works for me!
Re: Protecting MV stereo equipment from dust
I'd start with marine stereo systems.
You can go further.
Full remotes are available for some.
You can go further.
Full remotes are available for some.
- oscillator
- Posts: 578
- Joined: Fri Feb 27, 2009 9:30 pm
- Location: heading north on forever street
- Contact:
Re: Protecting MV stereo equipment from dust
For a sound system Google "ATV AUDIO PIPE" - you can make your own or buy them.
https://www.google.com/search?sourceid= ... 30&bih=949
For your ipod, get a tupperware box and drill cable holes - then seal them up with E6000 adhesive.
HTHS
-oSc-
https://www.google.com/search?sourceid= ... 30&bih=949
For your ipod, get a tupperware box and drill cable holes - then seal them up with E6000 adhesive.
HTHS
-oSc-