I used it last year for the first time. I would say that my swamp cooler was not optimized to work its best. For one, the only evap pads I could find at Ace hardware that resembled the ones Figjam recommends seemed to be insufficient. This year I got the natural hay-like substrate that people say is a bit moopy or can clog your pump. I cut it at home, so am not expecting any moop issues -- will have to see about the clogs, but I'm optimistic. As for ducting, I use flexible metal ducting hose, which i slip over the end of the 90 degree elbow that comes off the bucket. A friend of mine, however, overhauled his swamp cooler this year and used flexible plastic ducting (like this http://www.mge.com/images/embed_dryervent_plastic.jpg, which attaches with something like this, which it snaps on to: http://ecx.images-amazon.com/images/I/4 ... SX300_.jpg). He also used bolts to attach the fan and the various components to the bucket lid, which i found to be much better than using the screws that come with the fan, since those can eventually crack the lid. As for getting the max seal between my tent zipper and the ducting, it never seemed to me like getting a seal around the pipe with the zipper was an issue -- it always seemed fairly tight. I suppose if you wanted to seal it any better, you could just wrap some cloth or a towel around it on the inside where it enters. This all being said, my tent had no shade last year (my friend's plan didnt pan out), and with a sub-optimal swamp cooler, I didnt feel like it was a huge benefit (and with my 10x14x7 kodiak, it may be a bit too much volume to service with just a single bucket cooler). With my improved evap pads and shade this year, I'm hoping for better. Another trick my friends use (they have the same sized tent) is they sewed several sheets together to form a bubble around them and their air mattress, and they attach the ducting to that, which inflates with cooled air. That way they don't have to cool their whole tent -- just the air around them while they sleep. They say it gets so cold they need extra blankets
cooling your tent or van
- MacGlenver
- Posts: 873
- Joined: Thu Feb 09, 2012 5:11 pm
- Burning Since: 2011
- Camp Name: I call this one 'Old Gregg'
Re: cooling your tent or van
Someone PMd me about how my swamp cooler worked with my Kodiak tent (10x14). Here's my response in case it's helpful to others:
I used it last year for the first time. I would say that my swamp cooler was not optimized to work its best. For one, the only evap pads I could find at Ace hardware that resembled the ones Figjam recommends seemed to be insufficient. This year I got the natural hay-like substrate that people say is a bit moopy or can clog your pump. I cut it at home, so am not expecting any moop issues -- will have to see about the clogs, but I'm optimistic. As for ducting, I use flexible metal ducting hose, which i slip over the end of the 90 degree elbow that comes off the bucket. A friend of mine, however, overhauled his swamp cooler this year and used flexible plastic ducting (like this http://www.mge.com/images/embed_dryervent_plastic.jpg, which attaches with something like this, which it snaps on to: http://ecx.images-amazon.com/images/I/4 ... SX300_.jpg). He also used bolts to attach the fan and the various components to the bucket lid, which i found to be much better than using the screws that come with the fan, since those can eventually crack the lid. As for getting the max seal between my tent zipper and the ducting, it never seemed to me like getting a seal around the pipe with the zipper was an issue -- it always seemed fairly tight. I suppose if you wanted to seal it any better, you could just wrap some cloth or a towel around it on the inside where it enters. This all being said, my tent had no shade last year (my friend's plan didnt pan out), and with a sub-optimal swamp cooler, I didnt feel like it was a huge benefit (and with my 10x14x7 kodiak, it may be a bit too much volume to service with just a single bucket cooler). With my improved evap pads and shade this year, I'm hoping for better. Another trick my friends use (they have the same sized tent) is they sewed several sheets together to form a bubble around them and their air mattress, and they attach the ducting to that, which inflates with cooled air. That way they don't have to cool their whole tent -- just the air around them while they sleep. They say it gets so cold they need extra blankets
I used it last year for the first time. I would say that my swamp cooler was not optimized to work its best. For one, the only evap pads I could find at Ace hardware that resembled the ones Figjam recommends seemed to be insufficient. This year I got the natural hay-like substrate that people say is a bit moopy or can clog your pump. I cut it at home, so am not expecting any moop issues -- will have to see about the clogs, but I'm optimistic. As for ducting, I use flexible metal ducting hose, which i slip over the end of the 90 degree elbow that comes off the bucket. A friend of mine, however, overhauled his swamp cooler this year and used flexible plastic ducting (like this http://www.mge.com/images/embed_dryervent_plastic.jpg, which attaches with something like this, which it snaps on to: http://ecx.images-amazon.com/images/I/4 ... SX300_.jpg). He also used bolts to attach the fan and the various components to the bucket lid, which i found to be much better than using the screws that come with the fan, since those can eventually crack the lid. As for getting the max seal between my tent zipper and the ducting, it never seemed to me like getting a seal around the pipe with the zipper was an issue -- it always seemed fairly tight. I suppose if you wanted to seal it any better, you could just wrap some cloth or a towel around it on the inside where it enters. This all being said, my tent had no shade last year (my friend's plan didnt pan out), and with a sub-optimal swamp cooler, I didnt feel like it was a huge benefit (and with my 10x14x7 kodiak, it may be a bit too much volume to service with just a single bucket cooler). With my improved evap pads and shade this year, I'm hoping for better. Another trick my friends use (they have the same sized tent) is they sewed several sheets together to form a bubble around them and their air mattress, and they attach the ducting to that, which inflates with cooled air. That way they don't have to cool their whole tent -- just the air around them while they sleep. They say it gets so cold they need extra blankets
"just two indecisive cowboys, trying to play a word game." - piehole
"Just apply intelligence and discretion and you should be able to get away with just about anything." - Ugly Dougly
"Just apply intelligence and discretion and you should be able to get away with just about anything." - Ugly Dougly
Re: cooling your tent or van
"sewed several sheets together to form a bubble around them and their air mattress, and they attach the ducting to that, which inflates with cooled air."
Fully endorse this method when trying to "stretch" the bucket cooler to use in a larger-than-recommended space. I just hung an extra sheet as a curtain around by bed and kept the cold air where it was most needed.
There are a number of tests you can do to optimize your swampie, see further back in the thread. Although it's crunch time now, I'm leaving in less than 12 hours AKKKKKKKKKK!K!K!KK!K!
Fully endorse this method when trying to "stretch" the bucket cooler to use in a larger-than-recommended space. I just hung an extra sheet as a curtain around by bed and kept the cold air where it was most needed.
There are a number of tests you can do to optimize your swampie, see further back in the thread. Although it's crunch time now, I'm leaving in less than 12 hours AKKKKKKKKKK!K!K!KK!K!
- MacGlenver
- Posts: 873
- Joined: Thu Feb 09, 2012 5:11 pm
- Burning Since: 2011
- Camp Name: I call this one 'Old Gregg'
Re: cooling your tent or van
I've got a bunch of sheets in storage that we'll be loading in Sacramento... maybe I should bring my sewing machine out thereasr9754 wrote:"sewed several sheets together to form a bubble around them and their air mattress, and they attach the ducting to that, which inflates with cooled air."
Fully endorse this method when trying to "stretch" the bucket cooler to use in a larger-than-recommended space. I just hung an extra sheet as a curtain around by bed and kept the cold air where it was most needed.
There are a number of tests you can do to optimize your swampie, see further back in the thread. Although it's crunch time now, I'm leaving in less than 12 hours AKKKKKKKKKK!K!K!KK!K!
"just two indecisive cowboys, trying to play a word game." - piehole
"Just apply intelligence and discretion and you should be able to get away with just about anything." - Ugly Dougly
"Just apply intelligence and discretion and you should be able to get away with just about anything." - Ugly Dougly
Re: cooling your tent or van
If you use the 190 CFM fan, the optimal limit you can cool is 570 cu. ft.
I round that up to 600, but you were definitely pushing it with that size tent.
Relative humidity is a huge factor.
I round that up to 600, but you were definitely pushing it with that size tent.
Relative humidity is a huge factor.
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
Re: cooling your tent or van
My cooling setup...refurbished from last year. Added the foil tape to bounce off a little of the sun.
My fan is one I had lying around, it's a Delta AFB1212SH. Says it gets 113CFM. Still made a big difference in the hexayurt, which is a lot of space to cool off.
Also...the 190CFM fan draws up to 3.0 amps...my fan draws only 0.8 amps. The extra runtime is nice since I like to leave it on a long time.

My fan is one I had lying around, it's a Delta AFB1212SH. Says it gets 113CFM. Still made a big difference in the hexayurt, which is a lot of space to cool off.
Also...the 190CFM fan draws up to 3.0 amps...my fan draws only 0.8 amps. The extra runtime is nice since I like to leave it on a long time.

Re: cooling your tent or van
I don't know where people are getting that 3 amp figure.
The first 190CFM I bought said 1.25 AMPS and the site now says 1.60AMPS.
With the pump, mine uses about 2AMPS.
The first 190CFM I bought said 1.25 AMPS and the site now says 1.60AMPS.
With the pump, mine uses about 2AMPS.
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
Re: cooling your tent or van
I zoomed in on the label of the fan on Newegg and the label says 3 amps. Maybe that's if you jam your finger on it...
Re: cooling your tent or van
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
Re: cooling your tent or van
http://www.newegg.com/Product/Product.a ... 6835213010
Apparently not all 120mm 190CFM fans are created equal...
Apparently not all 120mm 190CFM fans are created equal...
Re: cooling your tent or van
Yup, the difference between the FOO and the CFOO.
On this site the specs on the FOO say 3 amps!
http://www.frozencpu.com/cat/l3/g36/c43 ... Page1.html
On this site the specs on the FOO say 3 amps!
http://www.frozencpu.com/cat/l3/g36/c43 ... Page1.html
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
Re: cooling your tent or van
Cutting it close.. but trying to make figjam special before heading out. I'm in Los Angeles and missed the cutoff time for buying the pump (without paying an arm and a leg for shipping) through Amazon. Does anyone know where I can source a mini 12v pump locally in LA? I called four hydroponic shops and no luck.
Also, any local shops near downtown la where I can buy one of the high output fans, linked above? Trying to save where I can since my budget has sort of gotten out of control at this point. Thanks!
Also, any local shops near downtown la where I can buy one of the high output fans, linked above? Trying to save where I can since my budget has sort of gotten out of control at this point. Thanks!
Re: cooling your tent or van
You could get a pump from one of those crappy decorative fountains. They might even have a solar garden fountain at Harbor Freight.
Re: cooling your tent or van
what gph rate do we need on the pump?
Re: cooling your tent or van
That's not a bad idea, thanks!maladroit wrote:You could get a pump from one of those crappy decorative fountains. They might even have a solar garden fountain at Harbor Freight.
Re: cooling your tent or van
I purchased the fan posted on the original guide and it has a PWM 4 pin connector. I am having difficulty getting this fan to run just off of 12V power and ground. Is it possible to run without PWM control? I am attempting to splice it into the solar pump recommended on the original guide.
Re: cooling your tent or van
The fan can't be spliced into the HF solar pump since it's not 12 volt.FIGJAM wrote:Not sure if you are making observations or asking a question.
In the beginning when the HF solar pump was mentioned I said it LOOKED like the perfect pump.
After getting one and finding out it was only good under perfect conditions, I've only recommended a 12 volt submersible fountain pump.
Power consumption has always been a prime objective in the design so that a single 100AH battery or bigger would allow for a 5 or 6 hour nap every day for 7 or 8 days without having to recharge.
I've achieved all of that!
Any redesigns and add-on's that burners want to do is fine, but I didn't plan those, and they need to engineer to accommodate them.
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
-
aussieinusaburner
- Posts: 4
- Joined: Wed Jul 23, 2014 9:29 pm
- Burning Since: 2012
- Camp Name: high maintenance
Re: cooling your tent or van
HI all, URGENT help needed, my fountain pump got lost in shipping and I am struggling to find one locally (SF Bay Area). I need a 12v pump or a Solar Pump.
I leave tonight as I have early entry to build an art car.
I will go anywhere in the Bay Area, anyone got any ideas? No one I can find seems to have a 12v.
I leave tonight as I have early entry to build an art car.
I will go anywhere in the Bay Area, anyone got any ideas? No one I can find seems to have a 12v.
- SourPatch
- Posts: 53
- Joined: Mon Oct 28, 2013 10:36 am
- Burning Since: 2009
- Location: Orange County, CA
Re: cooling your tent or van
Harbor Freight has the solar ones that did not work for me, but hey, better than nothing!
http://www.harborfreight.com/lawn-garde ... 66093.html
They have other ones too if you have an AC source. http://www.harborfreight.com/lawn-garde ... 68396.html
8 watts though.
On a separate note, I was reading about adding essential oils to your evap cooler in order to make your living space smell good. I will try a combination of tea tree oil, lemongrass, and eucalyptus. Tea tree oil is supposed to inhibit mold/mildew too.
http://www.harborfreight.com/lawn-garde ... 66093.html
They have other ones too if you have an AC source. http://www.harborfreight.com/lawn-garde ... 68396.html
8 watts though.
On a separate note, I was reading about adding essential oils to your evap cooler in order to make your living space smell good. I will try a combination of tea tree oil, lemongrass, and eucalyptus. Tea tree oil is supposed to inhibit mold/mildew too.
Overkill or go home.
-
aussieinusaburner
- Posts: 4
- Joined: Wed Jul 23, 2014 9:29 pm
- Burning Since: 2012
- Camp Name: high maintenance
Re: cooling your tent or van
Harbor Freight still have it on the website but no longer available....
I need 12v...
Any other ideas would be great.
*** Ignore this, San Jose found some! Wahoo!
I need 12v...
Any other ideas would be great.
*** Ignore this, San Jose found some! Wahoo!
Re: cooling your tent or van
I just ordered one of these from Sacramento. A bit of a drive but..aussieinusaburner wrote:HI all, URGENT help needed, my fountain pump got lost in shipping and I am struggling to find one locally (SF Bay Area). I need a 12v pump or a Solar Pump.
I leave tonight as I have early entry to build an art car.
I will go anywhere in the Bay Area, anyone got any ideas? No one I can find seems to have a 12v.
http://www.lightobject.com/38Lmin-Mini- ... -P396.aspx
Re: cooling your tent or van
Find a 12 volt bilge pump.
HF may have one or check boat supply places.
They tend to pump more water and use more power, but you need something NOW!!!
HF may have one or check boat supply places.
They tend to pump more water and use more power, but you need something NOW!!!
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
-
aussieinusaburner
- Posts: 4
- Joined: Wed Jul 23, 2014 9:29 pm
- Burning Since: 2012
- Camp Name: high maintenance
Re: cooling your tent or van
Thanks all, got one of the Solar ones in San Jose, great tip from @iron_Horse that the solar does not pump out enough, he connected it to a 12v battery so will try that.
Thanks for all the help. Figjam you are that good!
arriving tonight wahoo
Thanks for all the help. Figjam you are that good!
arriving tonight wahoo
Re: cooling your tent or van
Be careful.
The HF solar pump is 7 volts!!!
The HF solar pump is 7 volts!!!
"Don't buy ur Burn...........Build ur Burn!"
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
"If I can't find an answer, I'll create one!!!"
Fuck Im Good Just Ask Me
- DesertDragon0554
- Posts: 21
- Joined: Thu Aug 28, 2014 11:59 pm
- Burning Since: 2015
- Location: Fernley/Silver Springs, NV
Re: cooling your tent or van
Hey everyone. I have a question about power supply for a portable swamp cooler. I'm trying to be self-reliant, but electricity is one area I just need very simple explanations. I was planning to build a portable swamp cooler but realized the bucket was was too small for our needs. Then I saw the plans for building the box, but that seems silly considering I live in the desert...as a matter of fact I HAVE a portable swamp cooler sitting 5 feet behind me...running. I had initially ruled it out thinking it too large and power hungry, but after browsing this thread for the last hour, I'm thinking I should at least ask about it. It's this same model as this one minus the stand that I removed a few years ago after it became wobbly. http://media.liveauctiongroup.net/i/114 ... 11403A8340
The sticker says 120V, 60Hz, 1.3A
Now, when talking power you might as well be speaking Japanese or Martian because I don't get it. I'm not sure if those power specs I gave are what is needed to answer if I can run this off a battery, or if I will need a solar panel to charge that battery? Something else?
Edited to add: I have a power inverter already and the battery won't be an issue. Heck I can get lots of batteries, hubby is a mechanic.
The sticker says 120V, 60Hz, 1.3A
Now, when talking power you might as well be speaking Japanese or Martian because I don't get it. I'm not sure if those power specs I gave are what is needed to answer if I can run this off a battery, or if I will need a solar panel to charge that battery? Something else?
Edited to add: I have a power inverter already and the battery won't be an issue. Heck I can get lots of batteries, hubby is a mechanic.
Re: cooling your tent or van
Can't really help you with this but people will chime in eventually once they return.
One thing I'm pretty sure will be said tho is that unless you know how and are prepared to knock that cooler down to its tinyest bits and spend several days cleaning the playa dust off each element, you'd best be resigned to never having it in the house again.
Imagine the inside of a shopvac after a plastering job. The buckets are def easier to clean out!
One thing I'm pretty sure will be said tho is that unless you know how and are prepared to knock that cooler down to its tinyest bits and spend several days cleaning the playa dust off each element, you'd best be resigned to never having it in the house again.
Imagine the inside of a shopvac after a plastering job. The buckets are def easier to clean out!
Worry is a misuse of imagination
“She had blue skin, And so did he.
He kept it hid And so did she.
They searched for blue Their whole life through,
Then passed right by- And never knew.”
Shel Silverstein
“She had blue skin, And so did he.
He kept it hid And so did she.
They searched for blue Their whole life through,
Then passed right by- And never knew.”
Shel Silverstein
Re: cooling your tent or van
Without getting too far into it, there are a number of factors what will affect using that swamp cooler on the playa:
- An inverter run by battery wastes energy converting it into AC. Cheaper inverters are worse.
- How would you keep the playa dust out of it? Without filtration, will it clog up. If you install filters, it's not designed to handle that drag. How will you get the playa dust out of it?
- As it stands, that unit would be good for blowing cooled onto you on the playa. To cool your shelter, you need to be able to have it intake hot dry playa air, and output the moist cooled air into your shelter. This requires ducting and sealing it to your shelter in some manner.
- If hooked up to your shelter, how noisy is it? Can you sleep with it running?
- How long can it run before it need water added, or dust removed, or a battery recharged.
Figjam's designs run directly of of DC, so there is no wastage. None on any fancy electronics to waste power either.
The DC voltage used is not lethal. When the rain hit this past Monday, a number of people with VAC setups were running around shutting down before someone got electrocuted. Same benefit if you get into adding switches of various sorts to a Figjam design.
The components recommended work well with each other and use little power. The Endless Breeze fan used in the box designs is amazing. Moves tons of air, quiet and low power consumption.
They use a pad material with a proven record of surviving the playa dust.
The flow flow down the pad washes the playa dust off of it. You may have to scoop out some wet dust/mud out of the bottom if it's been really dusty on the playa.
They have good capacity for water. We know how long they'll run for (water and electricity).
We have a pretty good idea how well they cool, so you'll know if it's enough for your shelter before you go.
There are a lot of little details that can limit or prevent a swamp cooler from working well on the playa.
People do very well with Figjam's designs,which are Playa-Tested©)'( (proven track record on-playa), when they are made as recommended without modification.
It's when people vary from those designs that they can screw themselves. You can read through the long thread, and you can post your suggested components or modifications here and people will post what issues you may or may not have with them. Or build a tried & true design and be done with it.
If you use the AC one you have, you won't know what trouble you'll have with it until you're on the playa. You could be without any or adequate cooling for your shelter.
Someone may say, so big deal, no cooling for the week.
Well, even assuming there's no medical need to be able to have cooled, moist or dust-free air inside your shelter, it can make a big difference in how much you're able to do during Burn week. The big need is to be able to get enough sleep. Once the sun is up in the morning, things quickly get hot. Your shelter is typically like an oven, baking on the playa. A swamp-cooler means you get to sleep longer, quality sleep, and you can get a comfortable rest and respite from the heat, anytime you turn it on, so you can get out, explore and participate to your max.

- An inverter run by battery wastes energy converting it into AC. Cheaper inverters are worse.
- How would you keep the playa dust out of it? Without filtration, will it clog up. If you install filters, it's not designed to handle that drag. How will you get the playa dust out of it?
- As it stands, that unit would be good for blowing cooled onto you on the playa. To cool your shelter, you need to be able to have it intake hot dry playa air, and output the moist cooled air into your shelter. This requires ducting and sealing it to your shelter in some manner.
- If hooked up to your shelter, how noisy is it? Can you sleep with it running?
- How long can it run before it need water added, or dust removed, or a battery recharged.
Figjam's designs run directly of of DC, so there is no wastage. None on any fancy electronics to waste power either.
The DC voltage used is not lethal. When the rain hit this past Monday, a number of people with VAC setups were running around shutting down before someone got electrocuted. Same benefit if you get into adding switches of various sorts to a Figjam design.
The components recommended work well with each other and use little power. The Endless Breeze fan used in the box designs is amazing. Moves tons of air, quiet and low power consumption.
They use a pad material with a proven record of surviving the playa dust.
The flow flow down the pad washes the playa dust off of it. You may have to scoop out some wet dust/mud out of the bottom if it's been really dusty on the playa.
They have good capacity for water. We know how long they'll run for (water and electricity).
We have a pretty good idea how well they cool, so you'll know if it's enough for your shelter before you go.
There are a lot of little details that can limit or prevent a swamp cooler from working well on the playa.
People do very well with Figjam's designs,which are Playa-Tested©)'( (proven track record on-playa), when they are made as recommended without modification.
It's when people vary from those designs that they can screw themselves. You can read through the long thread, and you can post your suggested components or modifications here and people will post what issues you may or may not have with them. Or build a tried & true design and be done with it.
If you use the AC one you have, you won't know what trouble you'll have with it until you're on the playa. You could be without any or adequate cooling for your shelter.
Someone may say, so big deal, no cooling for the week.
Well, even assuming there's no medical need to be able to have cooled, moist or dust-free air inside your shelter, it can make a big difference in how much you're able to do during Burn week. The big need is to be able to get enough sleep. Once the sun is up in the morning, things quickly get hot. Your shelter is typically like an oven, baking on the playa. A swamp-cooler means you get to sleep longer, quality sleep, and you can get a comfortable rest and respite from the heat, anytime you turn it on, so you can get out, explore and participate to your max.
4.669
.
That's one word I regret googling during breakfast.
.
Video games are giving kids unrealistic expectations on how many swords they can carry.
.
, but don't harm the red dragon that frequents the area from time to time. He and I have an agreement.
.
That's one word I regret googling during breakfast.
.
Video games are giving kids unrealistic expectations on how many swords they can carry.
.
, but don't harm the red dragon that frequents the area from time to time. He and I have an agreement.
- Captain Goddammit
- Posts: 8589
- Joined: Sat Sep 06, 2003 9:34 am
- Burning Since: 2000
- Camp Name: First Camp
- Location: Seattle, WA
Re: cooling your tent or van
Short answer about the power, that's too much to be practical on batteries.
Best answer about power, read this, I came up with a way to translate Martianese into English:
viewtopic.php?f=278&t=65368&hilit=Burne ... lectricity
Best answer about power, read this, I came up with a way to translate Martianese into English:
viewtopic.php?f=278&t=65368&hilit=Burne ... lectricity
GreyCoyote: "At this rate it wont be long before he is Admiral Fukkit."
Re: cooling your tent or van
p.s.
most people, most years, can run their DC swamp cooler for their periodic needs through the BM week on a single battery charge.
IF they're using the recommended components and a suitable battery.
most people, most years, can run their DC swamp cooler for their periodic needs through the BM week on a single battery charge.
IF they're using the recommended components and a suitable battery.
4.669
.
That's one word I regret googling during breakfast.
.
Video games are giving kids unrealistic expectations on how many swords they can carry.
.
, but don't harm the red dragon that frequents the area from time to time. He and I have an agreement.
.
That's one word I regret googling during breakfast.
.
Video games are giving kids unrealistic expectations on how many swords they can carry.
.
, but don't harm the red dragon that frequents the area from time to time. He and I have an agreement.
- DesertDragon0554
- Posts: 21
- Joined: Thu Aug 28, 2014 11:59 pm
- Burning Since: 2015
- Location: Fernley/Silver Springs, NV
Re: cooling your tent or van
Well, to answer most of that...this cooler is a very simple design, I tear it down for cleaning every year.. Washing it down and swapping the pad out would easily clean it out to be used in my house again...and if not it's ok because I don't need it in my house anymore. We bought it when we lived in Tahoe and I was pregnant and hot, but here we have the big swamp cooler on the roof. I'm only using it now as a fan at night. It's ten years old and it's been used to chill a camper before, but we had unlimited electricity. The ducting was something I planned to build onto it, normally we just sit out in front of an open window but I realize that won't work on the playa. It's not loud at all and has a pump designed to run dry without damage. The replacement pumps are cheap as well, do I would have a spare on hand. I could take photos of it opened up if that helps. Oh and the inverter have isn't a cheap one at all.
- DesertDragon0554
- Posts: 21
- Joined: Thu Aug 28, 2014 11:59 pm
- Burning Since: 2015
- Location: Fernley/Silver Springs, NV
Re: cooling your tent or van
Holy cow, let me try this again without autocorrect making me crazy. OK, I would not be heartbroken if this cooler became a 'playa use only' cooler, but I am relatively certain that I can effectively clean it because the design is so simple. We actually have a "mini playa" about ten minutes from my house and planned to do a dry run there to test everything. We get 70mph winds and such right here at home, so the idea was to test out on a gusty day. We also planned a second dry run out on the playa itself... it's only a 90 minute drive so it's not unreasonable. We have more than one idea/system we want to test run anyway and the kids want to check it out. If it won't work, that's fine. I can build the endless wind machine, but it just seems silly to not at least look into using what I already have on hand.
Oh and swamp cooler pads are no problem. I have a roll of the blue kind on hand because we have to change our big cooler pads out twice a season, and the aspen type is readily available though we tend to prefer the blue.
Thank you Captain Goddammit for the translation
Very helpful.
Oh and swamp cooler pads are no problem. I have a roll of the blue kind on hand because we have to change our big cooler pads out twice a season, and the aspen type is readily available though we tend to prefer the blue.
Thank you Captain Goddammit for the translation
Last edited by DesertDragon0554 on Sat Aug 30, 2014 3:18 pm, edited 1 time in total.