Steel posts?

Ideas, advice, tips, and tricks regarding shelter, shade, tents, and camping. Yes, this includes RV's too.
Post Reply
sgtcrispy
Posts: 7
Joined: Mon Apr 28, 2008 11:45 pm
Location: South Dakota

Steel posts?

Post by sgtcrispy » Wed Aug 20, 2008 10:33 pm

I've thinking about using some steel posts to put a barrier/shade with a tarp or two. Steel posts as in fence posts fyi.
I was wondering if those are ok for the playa since pulling them out would/could leave a nice little hole if removed improperly.

Should have posted on this sooner, but I get lazy.

See ya there!!

User avatar
chiefdanfox
Posts: 786
Joined: Sun Mar 19, 2006 11:14 pm
Burning Since: 1986
Location: Bodega Bay, CA

Post by chiefdanfox » Wed Aug 20, 2008 10:43 pm

Sarge,
If they're the ones I think you mean, with the steel flag on the foot, then if you have the means to drive them in, and pull them, then you have the means to repair. Filling, tamping, filling, tamping, maybe a little water (less than mixing concrete), until it looks like they were not there.

User avatar
Bob
Posts: 6747
Joined: Wed Sep 03, 2003 10:00 am
Burning Since: 1986
Camp Name: Royaneh
Location: San Francisco
Contact:

Post by Bob » Wed Aug 20, 2008 10:46 pm

I use t-stake fenceposts for windbreak fences around my camp. No problem.
Amazing desert structures & stuff: http://sites.google.com/site/potatotrap/

"Let us say I suggest you may be human." -- Reverend Mother Gaius Helen Mohiam

fenwick
Posts: 101
Joined: Sat Sep 08, 2007 8:29 pm

Post by fenwick » Wed Aug 20, 2008 10:51 pm

I prefer "smooth" rebar over the "ribbed" rebar.

Smooth is easier to get out of the playa- the ribbed rebar can really grab hold.

I typically never have to pound further then 8 inches into the playa.

Smooth also leaves less of a disfugred surface- easier to repair when breaking camp.

Tennis balls or milk jugs to mark the poles so they be avoided by pedestrian traffic.

sgtcrispy
Posts: 7
Joined: Mon Apr 28, 2008 11:45 pm
Location: South Dakota

Post by sgtcrispy » Wed Aug 20, 2008 10:54 pm

The "T" ones would be ones I would be using.

Cool thanks guys. :)

Steven bradford
Posts: 351
Joined: Thu Sep 04, 2003 11:29 pm
Location: Seattle
Contact:

Post by Steven bradford » Wed Aug 20, 2008 11:20 pm

They work great. I prefer them over rebar. have used them for several years now.

Get or make the 2" pipe hammer (it's a pipe with little side handles and an end cap) for driving them. much easier than a sledge hammer.

They remove fine, don't leave any worse of a hole than rebar does.
Steve

Paint or Be Painted
http://www.seanet.com/~bradford/Body_Painting_Technique.html

sgtcrispy
Posts: 7
Joined: Mon Apr 28, 2008 11:45 pm
Location: South Dakota

Post by sgtcrispy » Thu Aug 21, 2008 5:45 pm

[quote="Steven bradford"]
Get or make the 2" pipe hammer (it's a pipe with little side handles and an end cap) for driving them. much easier than a sledge hammer.
[/quote]

I grew up up on a farm and have used post drivers like those for years. So I'm covered there, it was just the environmental aspect I was concerned about.
Thanks :)

User avatar
Bob
Posts: 6747
Joined: Wed Sep 03, 2003 10:00 am
Burning Since: 1986
Camp Name: Royaneh
Location: San Francisco
Contact:

Post by Bob » Thu Aug 21, 2008 8:31 pm

DPW puts in a few thousand t-stakes every year, so don't worry about it.
Amazing desert structures & stuff: http://sites.google.com/site/potatotrap/

"Let us say I suggest you may be human." -- Reverend Mother Gaius Helen Mohiam

Post Reply

Return to “Building Camps”